The dedicated plunger pump for sludge filter press is a type of pump specifically designed for filter press equipment. It adopts a plunger design and can generate high pressure and flow rate to transport sludge from low to high. Here is the relevant introduction:

　　Characteristics

　　Efficient and energy-saving: By adopting multiple technological means such as hydraulic system optimization, motor energy-saving technology, pump body optimization design, and intelligent control, the energy consumption of equipment is reduced and the impact on the environment is minimized.

　　High pressure conveying: It can provide high pressure to cope with situations where sludge needs to be transported to long distances or heights.

　　Wear resistant and corrosion-resistant: The plunger is usually made of materials such as alumina ceramics, finely ground, with high hardness and low surface roughness. The pump body is made of corrosion-resistant materials, which can resist the erosion of corrosive substances in sludge and are suitable for transporting sludge containing sand and solid particles.

　　Strong self-priming ability: Adopting a plunger type vacuum pumping method, the self-priming ability can reach 4-8 meters, and the specific suction range is determined by the specific gravity of the material.

　　Easy to operate: Pressure adjustment only requires tightening or loosening the pressure regulating valve. After adjusting the pressure, lock it and there is no need to adjust it again in the future.

　　Stable and reliable: Using high-quality materials and advanced manufacturing processes, it can maintain stable working conditions for a long time, reduce failure rates, and has a simple structure that is easy to maintain and upkeep, reducing repair costs.

　　Model and parameters

　　Taking the YBH series of Xianyang Huaxing Pump Industry as an example, the YBH200 sludge plunger pump has a flow rate of 19 cubic meters per hour, a rated pressure of 0-20 kilograms that can be adjusted freely, a stroke of 250mm, and is equipped with a 7.5KW motor; the YBH400 filter press mud pump has a flow rate of 180 cubic meters per hour, a rated pressure of 0-15 kilograms that can be adjusted freely, and is equipped with a 45KW motor.

　　Application Fields

　　Mainly used in fields such as sewage treatment, sludge dewatering, and environmental engineering, it is used to transport sludge to filter presses for dewatering treatment, and is suitable for various large-scale sewage treatment and sludge treatment scenarios.