Common faults and solutions
Ceramic plunger rupture
Possible reasons:(1) The loosening of the plunger compression nut causes mutual ...
Ceramic plunger axial upward movement
Possible reasons:Loose plunger compression nut.Troubleshooting:Tighten the compr...
The hydraulic system wears out too quickly during use
Possible reasons:(1) The oil is too dirty.(2) Oil filter failure or detachment(3...
Large fluctuations in mud pressure
Possible reasons:(1) The pressure of a single cylinder cannot be increased.(2) T...
Insufficient displacement
The mud system malfunction caused insufficient displacement and inability to inc...
Abnormal hydraulic system pressure or oil
Possible reasons:(1) Oil filter blockage(2) The oil level in the fuel tank is lo...