The specialized plunger pump for sludge dewatering is a device used in the field of sludge treatment, mainly used to transport sludge to dewatering equipment such as filter presses for solid-liquid separation. Here is the relevant introduction:

　　Working principle

　　By reciprocating the plunger in the cylinder, liquid is sucked in and discharged. When the plunger moves upward, the volume inside the pump chamber increases, the pressure decreases, and the sludge is sucked in; When the plunger moves downwards, the pump chamber volume decreases, the pressure increases, and the sludge is discharged.

site of use

　　Characteristics

　　Strong wear resistance: It is usually made of wear-resistant materials such as ceramics, stainless steel, etc., which can effectively resist the wear of solid particles in sludge and extend its service life.

　　Good adaptability: Suitable for transporting sludge with high concentration, high viscosity, and containing particles, it can meet the treatment needs of different sludge characteristics.

　　High lift capacity: It has a large lift capacity and can transport sludge from low terrain areas to higher terrain treatment equipment, such as filter presses.

　　Strong processing capability: capable of handling high concentration sludge, with a large conveying capacity, which can improve the efficiency of sludge treatment.

　　Convenient control: Generally operated by an electronic control system, it can achieve automated control and facilitate the adjustment of flow and pressure.

　　Application Fields

　　Widely used in the sludge treatment process of municipal sewage treatment, industrial wastewater treatment, papermaking, printing and dyeing, chemical, pharmaceutical and other industries, it is used to transport sludge from treatment tanks, reaction tanks and other places to dewatering equipment such as filter presses.

　　Common models and parameters

　　Huaxing Pump YBH200-19 special plunger pump for sludge filter press: flow rate of 19m ³/h, rated pressure of 1.8MPA, stroke of 250MM, motor power of 7.5/11KW.

　　Huaxing Pump YBH300 Sludge Hydraulic Piston Pump: Rated flow rate of 60m ³/h, rated pressure of 1.8MPA, stroke of 350MM, equipped with a motor of 18.5KW.

　　Brand recommendation

　　Xianyang Huaxing Pump Industry Co., Ltd. has been focusing on the production of ceramic plunger mud pumps for more than 30 years. Its YBH series sludge plunger pumps have the characteristics of wear resistance, energy saving and high efficiency, and are widely used in various fields such as sand washing, coal washing, and desulfurization in brick factories.