YBH250-30 press feed pump is an energy-saving ceramic plunger pump for filter press produced by Xianyang Huaxing Pump Industry Co., Ltd. The following is its detailed introduction:

Main parameter flow rate: 30 cubic meters per hour.

Pressure range: 0-2MPa, rated pressure can be adjusted freely from 0-20 kg.

Stroke: 250mm.

Equipped motor: 11KW.

Dimensions: 1.95 × 1.6 × 2.2 meters.

Diameter of suction and discharge slurry pipeline: φ 133/φ 108.

Weight: 1.63 tons.

Fuel tank capacity: 310L.

Product Features

site of use

Energy saving: This pump is a pressure sensitive variable pump designed specifically for the feeding of filter presses. It can automatically adjust the flow rate and pressure according to the working status of the filter press, saving more than 60% energy compared to ordinary pumps.

Wear resistance: The plunger is made of alumina ceramic fired and finely ground, with a hardness of HLC8.5 or above and a surface roughness of 0.4um. The plunger and the conveyed material have no shear motion, making it suitable for conveying materials containing sand and solid particles, with a service life of over 15 years.

Low maintenance cost: The filter press uses this pump for feeding, and the annual maintenance cost is less than a few hundred yuan. Only the valve plate and rubber seal need to be replaced each time.

Pressure adjustable: The working pressure can be adjusted freely within the range of 0-20 kilograms, which can meet the working needs of different filter presses.

Application field: This pump is mainly used in the sewage treatment industry, especially suitable for scenarios where the filtration time exceeds 30 minutes when feeding the filter press. It can also be used for filter press feeding in other industries such as ceramics, mining, and chemical.